# Pinegrow confused when trying to configure shadows with decimal ranges between 1\>x\>-1 | Part I

**URL:** https://forum.pinegrow.com/t/pinegrow-confused-when-trying-to-configure-shadows-with-decimal-ranges-between-1-x-1-part-i/6164
**Category:** Bug Reports
**Tags:** bug
**Created:** [January 19, 2022, 12:18am UTC](https://forum.pinegrow.com/t/pinegrow-confused-when-trying-to-configure-shadows-with-decimal-ranges-between-1-x-1-part-i/6164 "2022-01-19T00:18:19Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Teryces](https://avatars.discourse-cdn.com/v4/letter/t/f04885/32.png) [@Teryces](https://forum.pinegrow.com/u/Teryces)
#### Post date: [January 19, 2022, 12:18am UTC](https://forum.pinegrow.com/t/pinegrow-confused-when-trying-to-configure-shadows-with-decimal-ranges-between-1-x-1-part-i/6164/1 "2022-01-19T00:18:19Z")

</div>

(Two Part post due to 1 Image limit)  
The Wheel used to change the shadows direction has no effect when using decimal ranges between 1 and -1. Instead, it just copies the distance into both the X- and Y-Axis.  
It works fine when using decimal values above/below, like 1.2Rem . Wether you use Rem, Em, %, Px etc. has no effect.  
 ![grafik](https://canada1.discourse-cdn.com/flex036/uploads/pinegrow/original/2X/7/7c3fcf30d7fc97a42fdb27c4c513e7940c7c936e.png)

(I selected the shadow’s display as None, but it has no effect on the issue)

EDIT: This likely is caused by the wheel only changing the values in steps of 1. Therefor I would like to request that the functionalitly is added that the wheel can also change in decimal steps. Atleast when using rem & em in values below 10 (since the whole number increment does makes sense for px & % units).